Yamaha PM1000 mic preamp module recpped RARE pre/post US $235
AUCTION DESCRIPTION
" Remember the old days when excssaudio used to run the 2 modules for $149 auction?? For over 18 months I listed these modules, and parts, and oh boy what a cottage industry!! Well I shipped modules to 20 counrtries, 33 states...well now that the smoke has cleared...and I retired as the "Unofficial PM1000 King"...lol....I have several of these very rare factory installed pre/pot aux send switch modules left.... so if you are a CONSOLE OWNER...then you know how sick of dropping your faders and still hearing your reverb returns....well I found this one console at a church...and of all the 16ch, 24ch, 32 frame consoles I bought and sold in those days only ONE...1, uno, had these pre/post switches...you can see it is no college frat mod...this is factory....
Oh and these two modules are CLEAN....RECAPPED w Panasonic SE caps...and the EQ freq's updated to more Neve like Q's,,,they SOUND AWESOME....if your going to rack them...oh well....so much for the pre/post...but I have power supplys, gain blocks , photos, schematics and caps just like the old days.... so if you wanna couple cheap rusty PM1000 modules for $100 from some console out in some guys yard covered w tarps getting rained on (oh ya...found a few of those....found one that was underwater for a month....and I'll be damed if it didnt work when we dried it out...).......
But if you want this clean already recapped pair from a guy who wrote at least several chapters in "The PM1000 Rack Book"....then buy these....
Oh...if you buy 4, I will show u an easy method to build a very cool "sidecar" box.......as well as send you most of the fabrication parts ....(just build a wood box, buy a $20 Mouser 48Volt supply...yeeup... ...want balanced outputs?? Wanna mout the transformers right to the modules....and have a transformer in...transformer out mic pre/line level EQ?? Uhh huh.... built that one too....CHEEAP....lol....well..... also selling a 16 frame empty pm1000 console....a 32 frame empty console....heck...I even hav a huge folder of all the tech notes...service schematics...even the brochures...."
Summit Audio MPC-100A Tube Preamp & Compressor/Limiter $1,760
AUCTION DESCRIPTION
"This a Valve Pre Amp Comp/Limiter. Highly respected, versatile unit as a mic pre, instrument DI, compressor, with tube and solid state gain stages. This is a single channel tube preamplifier and tube compressor/limiter all in one unit, accepting line, microphone, and Hi-Z input signals. The preamplifier provides a warm yet crisp vacuum tube tone. The compressor/limiter section has very fast attack times, making it ideal for optimizing signal prior to entering the digital domain.
In addition to having superb sound and a user friendly interface, the MPC-100A has the robust build quality consistent with the Summit Audio family of products.
Features
* Highly respected, versatile unit as a mic pre, instrument DI, compressor, with tube and solid state gain stages
* "Clean" to "Saturated" valve sounds
* Soft Clipping LED indicators
* HI-Z instrument input with impedance matching control
* Two stages of vacuum tube gain controls
* 3 Position attack and release presets
* High quality VU meter for output and gain reduction metering
* Continuously variable output level control
* +4 dB balanced and -10 dB unbalanced output
* Stereo linkable with a second MPC-100A
* Jensen mic transformer "
Trident A range mic pre/eq original US $5,000
FROM EBAY SELLER
I have a spare Trident A range mic pre/eq for sale here...Original plum face,Zutt 012 transformer etc..New hi/low cut switches installed. Works perfect.Will need to rack. Easy to do. Also included one female red range connector and 4 original gray
fader/eq switch caps. Very rare mic pre/eq. Cant afford a pair..Here is one so you can have that original Trident A range sound.
Studer 900 channelstrips Vintagetools 19″ rack with two US $2,390
FROM EBAY SELLER
Up for auction is a 19" 3u rack build by the german company Vintagetools. Each VT900 rack is fitted with two Studer 900 Series channelstrips and a special pcb backpane that gives you balanced outputs at studio level.
The rack you´re bidding on has the A-version channels fitted. The A-version has 4-bands of eq and additional sweepable hi-cut and lo-cut filters. The B-version only has 3-bands which are not fully parametric and offers no filters.These channelstrips sound absoluetly amazing. The pdf´s with all technical specs and more information about our
custom racking services for vintage german broadcast modules can be found on our website. Compare the specs to Neves, Neumanns, SSL, etc. You will be amazed!The dollar is higher than it was two month ago plus you can buy taxfree.
Save 800,00 $ now compared to our offer in the online-shop!!!You´re bidding on:
The rack as shown on the pictures
2 Studer 900 series channelstrips (all recaped and serviced!)
2x mic inputs, 2x line Inputs, 2x balanced line outputs
Connector for the VT900psu, cable and psu.
The psu, as the backpane was developed by vintagetools and delivers all the five (5!!!) voltages you´ll need to run the channels.
This is a plug&play solution for one of the finest analog channel you can get.The transformer balanced option is available through our website.
CALREC VINTAGE EQ MIC PREAMP 1061 $1,999
FROM AUCTION:
"Last one . I had a pair this is it ! We can also Strap the Power supply voltage for International use free of charge . 110 220 230 240 etc .
This auction is for 1 Calrec 1061 EQ MICROPHONE PREAMP DI and Power supply . The Mic Pre and EQ are killer they sound great and the DI is out of this world!
LOCAL PICKUP OK CASH PREFERRED !
The front panel features are Mic input or DI option switch ,48V , you can use the unit with or without the transformer , Normal or HI Q , Bypass or Insert . As well as a output on the front panel . I added eq points you can see on the photo section .
This unit has been racked professionally by Brent Averill and i will add they did a fine job . The unit has been recapped and besides that is in original condition. The unit sound is Fantastic the Calrec company was formed by ex Neve employees so they are very similar in design . The EQ section is very similar to a NEVE 1081 a lot of the same EQ points and are internally laid out very similar . They also have a great build quality lots of IRON Sowter Input and output transformers that are from the console . Calrec 1061's are discrete.
Here is info from the Brent Averill website and a couple of threads from Calrec users online.
"The Calrec PQ 1061/1161 mic preamp is punchy, tight and has an open top end. It has great headroom and does not smear transients. It sounds similar to the vintage API™ mic preamp.
The Calrec equalizer is really great. It has lots of headroom and does not color the sound. You can boost 12 dB or more without hitting the crunch point on any of the bands. It is great for mastering because of its lack of coloration."
The PQ1061 and 1161 are pretty much identical. Run class-ab, all discrete, 8 amp stages with internal construction that is on par with anything neve made, and for some reason they really remind me of the Wunder PEQ1 module in terms of amp stages and general feature set compared to say a 1073.
The 1061 and 1161 run on +/-22V, and feature Sowter 3777 input, and should also use a Sowter 3955 output transformer which is a huge nickel core.
They are fast, punchy and open sounding, with some crunch to them. They are in between Neve and API, perfect for drums and guitars etc. EQ is as good as anything Neve has put out on the 33114 or 33115 modules etc..."
FS: BFE Filtek Dual Channel Strip Micpre 76dB EQ RACKED $1,299
These channel strips were made by the german company BFE which is related to Filtek and Siemens. It`s a high quality product with excellent specs and high quality components so it sounds absolutely great.
The preamp has a gain of 76dB. Originally it has a transformer for mic input. I added a Haufe transformer for line input and another Haufe for the balanced out.
Instead of the channel fader a pot was installed. The units has two AUX outs as also an unballanced INSERT.
The connectors on the rear side a mic IN, liune IN, INSERT, AUX1, AUX2, OUT.
The unit has switchable phantom power for both channels.
The needed main voltage is 220 - 240V. A matching step up transformer can be offered on demand.
GML 2032 PREAMP & EQ *BARELY USED* $2,399
The GML 2032 Preamp-EQ combos rarely ever come up for sale here on eBay. I'm only selling because I'm getting a new console. I wish I could keep it. I love it and it sounds fantastic, especially on acoustic guitars, vocals, strings and percussion. And, it's in near mint condition; just a couple light scuffs on the top of the case due to racking.
USED GEAR PORTALS
BRAND
PRICE
